Avocent USB6000 is a high performance USB extender that enables you to locate your critical computing hardware away from the user work station whilst maintaining the original user desktop experience. It can transmit USB 2.0 over a single CATx cable or via an 1 GB IP nework.Transparent USB 2.0 operation Switchable and routable USB 2.0 Hi-speed for mass storage devices plus: USB 2.0 (low an full speed) for keyboard, mouse, tablet and touch screen Supports USB 3.0 controllers Isochronous support for audio devices and web cams Plug and play FEATURES USB 2.0Enables connection of any USB human interface device - from mice and keyboards through to touch screens, graphics tablets, jog shuttles, joysticks and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can also be used.Transparent OperationOnce connected, operation is totally transparent to the host system, the USB peripheral(s) and you, the user. There are no drivers to install and your USB devices work precisely as they did before; the only difference is that they are now up to 100 meters away from the host. There is no need for drivers or software to be installed. Plug and PlayAvocent USB6000 extenders are delivered in a zero config state so you can plug the units in and start working with they straight away. When supplied as pairs, they are already synchronized, so they will located each other automatically over your network. Integrated HMX Advanced Manager ControlThe USB6000 can be controlled and switched via the HMX Advanced Manager or it can operate separately, as a point to point USB extender using a single length of CATx cable. APIAn API is available, supporting all functionality to which authorized 3rd party control systems can interface. Support for Audio DevicesWith Isochronous support the USB6000 will work with USB microphones and headsets as well as web cams.