Tripp Lite SMART500RT1UN SmartPro 500VA Rack/Tower UPS
Manufacturer: Tripp Lite
UPC: 037332224170
Condition: New
Tripp Lite SMART500RT1UN SmartPro 500VA Rack/Tower UPS
Price $622.93
Product Type Line-interactive UPS
Brand Name Tripp Lite
Manufacturer Tripp Lite
Product Model SMART500RT1UN
Product Name SmartPro SMART500RT1UN 500VA Rack/Tower UPS
Product Line SmartPro
Manufacturer Part Number SMART500RT1UN
Manufacturer Website Address http://www.tripplite.com
Environmentally Friendly Yes
Environmental Certification RoHS
Package Contents
  • SmartPro SMART500RT1UN 500VA Rack/Tower UPS
  • WEBCARDLX Network Management Card
  • Micro USB to USB-A
  • USB Cable
  • DB9 Cable
  • EPO Cable
  • Rack-Mounting Hardware
  • Owner's Manual
Backup/Run Time (Full Load) 3 Minute
Typical Battery Recharge Time 14.40 Hour
Transfer Time 4 ms
Receptacles 7 x NEMA 5-15R
Plug/Connector Type NEMA 5-15P
Height 1.7"
Width 17.3"
Depth 11.3"
Rack Height 1U
Form Factor Rack/Tower
Weight (Approximate) 17.60 lb
Load Capacity 500 VA/300 W
Input Voltage 120 V AC
Output Voltage 120 V AC 110 V AC 115 V AC
Limited Warranty 3 Year
500VA/300W/120V Battery Backup for PC Networks, Security Systems or Digital Signage The SmartPro® line-interactive SMART500RT1UN UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, overvoltages, surges and line noise that can damage valuable electronics or destroy data. The seven-outlet 120V battery backup is ideal protection for rack-mount equipment in your server room or network closet. Allows Time to Back Up Critical Files During a Blackout Backup support allows you to work through short power failures and gives you enough time to safely save files and shut down your system in case of a prolonged blackout. Backup time varies according to load, but the line-interactive UPS system should keep a half load (150W) powered as long as 14 minutes and a full load (300W) up to three minutes. Included WEBCARDLX Network Interface Offers 24/7 Access The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimal communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities, including temperature and humidity conditions. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. 7 NEMA Outlets Protect Your Connected Components Seven 5-15R outlets provide battery backup, 567 joules of surge protection and voltage regulation for your crucial components. Six are UPS-supported, and one is surge-only to connect peripherals not requiring battery backup. One UPS-supported outlet is switchable, allowing you to power its connected device on and off remotely to reset or reboot it or to shed a less significant load to extend battery runtime for more critical equipment. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts and overvoltages. The SMART500RT1UN maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure. The internal batteries are field-replaceable and hot-swappable. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. Designed for High Efficiency to Help You Save Money and Protect the Environment A 96% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs. LED Indicators and Audible Alarms Keep You Informed Five front-panel LEDs keep you apprised of line power, battery power, overload, voltage regulation and battery low/replace status at a glance. A multi-function alarm sounds to warn you of power failure, overload and low-battery conditions. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite's free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure. The EPO port supports emergency shutdown in large facilities. Cables are included.