Attention Customers:

1) We and our supply partners are experiencing a high volume of orders on health and safety products and inventories are rapidly changing. Due to this situation, orders are being processed slower than normal. We are working to communicate your order status as it progresses. 2) Health and safety products such as face masks, gloves, hand sanitizer and toilet paper are not returnable. Thank you again for your business and we appreciate your patience.

Telex TR-800-H1 UHF Two-Channel Wireless Beltpack TR-800
Manufacturer: Telex
Mfg Number: TR-800
UPC: 800549306461
SKU: TR-800-H1
Condition: New
Telex TR-800-H1 UHF Two-Channel Wireless Beltpack TR-800
Product TypeIntercom Sub Station
Brand NameTelex
ManufacturerThe Bosch Group
Product ModelTR-800
Product NameTR-800 UHF Two-Channel Wireless Beltpack
Manufacturer Part NumberTR-800-H1
Manufacturer Website Address
Form FactorBeltpack
Weight (Approximate)16 oz
Connectivity TechnologyWireless
Number of Channels2
Power SourceBattery
Package Contents
  • TR-800 UHF Two-Channel Wireless Beltpack
  • Antenna
On/Off & Volume ControlTurns the beltpack power on and controls head set volume.Wireless Talk Around (WTA)When pressed, the user's audio is disconnected from the wired intercom, auxiliary input/output and the base station's local headset. Other beltpack users, on that audio channel, can hear the user as normal.Stage Announce (SA)When pressed, the user's audio is routed to the stage announce connector on the back of the base station. The user also loses their sidetone as an indication that stage announce is activated. The other wireless beltpacks and wired users do not hear the user's audio. The button is non-latching and activates the nearby red LED.Audio Channel Select ButtonAllows user to select either audio channel A or B.Bat/Overmod Light (BAT/OM)Light will flash once when unit is turned on if the battery is good. If the light stays on, battery is low. If the light does not flash, battery is dead. A normal microphone gain setting will cause the LED to flash at the beginning of most words at normal speech levels. If the gain is too high, the LED will be red during the complete word at normal speech levels.Talk LightLED is on when the talk button, SA or WTA is active.Talk ButtonPress to enable the audio path from the local headset microphone. The "TALK" LED, #6, will turn red when enabled. A quick press and release latches the talk function, unless latching has been disabled. Holding the button for over ½ a second will cause the audio path to be enabled only for as long as the button is held. If the talk function is latched on, pressing the talk button again will turn it off.