TechLogix TL-A70-40W Amplifier
Manufacturer: TechLogix
UPC: 816927020102
SKU: TL-A70-40W
Condition: New
TechLogix TL-A70-40W Amplifier
Product TypeAmplifier
Brand NameTechLogix
ManufacturerTechLogix Networx, LLC
Product ModelTL-A70-40W
Product NameTL-A70-40W Amplifier
Manufacturer Part NumberTL-A70-40W
Manufacturer Website Addresshttp://www.tlnetworx.com
Minimum Frequency Response120 Hz
Maximum Frequency Response20 kHz
Total Harmonic Distortion (THD)0.3%
Operating Power Consumption45 W
RMS Output Power40 W
Number of Analog Audio Inputs2
Number of Digital Optical Inputs1
Country of OriginChina
Package Contents
  • TL-A70-40W Amplifier
  • Installation guide
  • Power adapter
  • 2 x Mounting ears
  • 4 x Mounting screws
  • RS232 cable
  • 4 x Plastic cushions
  • Pluggable terminal black
Limited Warranty3 Year
Most of us are familiar with connecting speakers to a stereo system: you pull the two conductor speaker cable, connect the red wire to the red terminal on the amp, connect the black wire to the black terminal on the amp, repeat on the right speaker, and then repeat on the left speaker. It's all pretty simple and straight forward... and it works great for stereo audio in a single room.But what do you do when you need to distribute audio to speakers in multiple areas? Or if the application won't really support left and right stereo audio? That's where a 70/100 volt (or "70/100v") system comes in...70/100v amplifiers have a higher signal voltage than conventional stereo audio amplifiers (commonly referred to as "8 Ohm" systems) and allow for more speakers and longer signal distances. This is ideal for any room or building requiring more than two speakers. These systems are commonly used in paging or background music applications, but are a great way to distribute audio anywhere using a very simple wiring concept.The TL-A70-40W provides 40 watts of power and four audio inputs-a microphone input, two analog stereo line inputs), and a digital audio input (typically a CD player, streaming audio player, or other media player). You can select from any of the three line inputs, and mix it with the microphone together into a single audio stream. That audio stream can be broadcast to multiple speakers simultaneously.