OS
Taoglas MA230.LBC.002 MA.230 Stream 3 in 1 Adhesive Mount Combination Antenna GPS/GLONASS/GALILEO
Manufacturer: Taoglas
SKU: MA230.LBC.002
Condition: New
Taoglas MA230.LBC.002 MA.230 Stream 3 in 1 Adhesive Mount Combination Antenna GPS/GLONASS/GALILEO
Connector TypeRP-SMASMA
Product TypeAntenna
Brand NameTaoglas
ManufacturerTaoglas
Product NameMA.230 Stream 3 in 1 Adhesive Mount Combination Antenna GPS/GLONASS/GALILEO
Package TypeBulk
Product LineStream
Manufacturer Part NumberMA230.LBC.002
Manufacturer Website Addresshttp://www.taoglas.com
Packaged Quantity1
Environmentally FriendlyYes
Environmental CertificationRoHS
Application/UsageCellular NetworkGPSGLONASSWireless Data Network
Height0.4"
Width2.6"
Depth7.9"
Form FactorAdhesive Mount
Weight (Approximate)6.35 oz
Antenna Gain3.2 dBi
Frequency Band TypeUHF
Frequency698 MHz to 2.17 GHz1.58 GHz1.60 GHz2.40 GHz4.90 GHz to 6 GHz700 MHz
The Stream 3in1 MA230 GPS/GLONASS/GALILEO, LTE Cellular 4G/3G/2G and Wi-Fi 2.4/5GHz antenna is a low profile, heavy-duty, fully IP67 waterproof external M2M antenna for use by RF professionals in telematics, transportation and remote monitoring applications. The Stream 3in1 is unique in the market as it combines the highest possible efficiency and peak gain for GPS/GLONASS/GALILEO, Wi-Fi dual-band 2.4/5GHz and all cellular bands in 4G/3G/2G in a low profile compact format for mounting via high quality first tier automotive approved 3M adhesive foam. Many module manufacturers specify peak gain limits for any antennas that are to be connected to that module. Those peak gain limits are based on free-space conditions. In practice, the peak gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the module specification to compensate for this effect, giving you better performance.Upon testing of any of our antennas with your device and a selection of appropriate layout, integration technique, or cable, Taoglas can make sure any of our antennas' peak gain will be below the peak gain limits. Taoglas can then issue a specification and/or report for the selected antenna in your device that will clearly show it complying with the peak gain limits, so you can be assured you are meeting regulatory requirements for that module. For example, a module manufacturer may state that the antenna must have less than 2dBi peak gain, but you don't need to select an embedded antenna that has a peak gain of less than 2dBi in free-space. This will give you a less optimized solution. It is better to go for a slightly higher free-space peak gain of 3dBi or more if available. Once that antenna gets integrated into your device, performance will degrade below this 2dBi peak gain due to the effects of GND plane, surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by the module manufacturer and enlisting our help will ensure you are getting the best performance possible without exceeding the peak gain limits.1.1. GPS/GLONASS/GALILEO The patent pending design incorporates internally a custom Taoglas 35mm patch antenna on an extended integral ground-plane to deliver more than 3.5dBiC gain. A front-end SAW filter dramatically reduces radiated spurious emissions. 1.2. Cellular 4G/3G/2G The extended ground-plane used with an innovative internal cellular PIFA also enables the unique wide-band 4G/3G/2G response to deliver the highest performance possible, at 3 metres cable length. Nothing else out there comes close in terms of consistency of efficiency and peak gain at all cellular bands, with 70%+ at the LTE 700MHz band, again including 3 metres of cable loss. High antenna efficiencies are absolutely critical in today's 3G and 4G systems to achieving targeted data-speeds and coverage.1.3. Wi-Fi dual-band 2.4/5GHz A powerful antenna gives maximum gain and coverage for common applications. 3dBi+ stable gain on both bands including cable loss means the antenna is ideal for high bandwidth applications. All this is done while still maintaining 20dB isolation between antennas. The Stream uses shielded PTFE dielectric ultra low-loss cables that maintain low attenuation at all frequency bands, and high noise rejection, with an average loss of only 0.3dB per meter (0.1dB per foot), compared to 0.7dB for RG58 and 1.2dB for RG174.