Attention Customers:

1) We and our supply partners are experiencing a high volume of orders on health and safety products and inventories are rapidly changing. Due to this situation, orders are being processed slower than normal. We are working to communicate your order status as it progresses. 2) Health and safety products such as face masks, gloves, hand sanitizer and toilet paper are not returnable. Thank you again for your business and we appreciate your patience.

Omnitron Systems 9343-1-19Z OmniConverter FPoE/SL Transceiver/Media Converter
Manufacturer: Omnitron Systems
UPC: 800975034983
SKU: 9343-1-19Z
Condition: New
Omnitron Systems 9343-1-19Z OmniConverter FPoE/SL Transceiver/Media Converter
Product TypeTransceiver/Media Converter
Product SeriesFPoE/SL
Brand NameOmnitron Systems
ManufacturerOmnitron Systems
Product Model9343-1-19Z
Product NameOmniConverter FPoE/SL 9343-1-19Z Transceiver/Media Converter
Product LineOmniConverter
Manufacturer Part Number9343-1-19Z
Manufacturer Website Address
Environmentally FriendlyYes
Environmental CertificationRoHS 2WEEEREACH
Fiber Optic Cable Standard9/125 µm
Media Type SupportedTwisted PairOptical Fiber
Fiber Mode SupportedSingle-mode
Fiber Optic Wavelength1310 nm
Maximum Distance Supported18.64 Mile
Ethernet TechnologyFast Ethernet
Network Technology100Base-X10/100Base-T100Base-BX
Number of Network (RJ-45) Ports1
Network (RJ-45)Yes
Management PortNo
Number of SC Ports1
Total Number of Ports2
PoE Port TypePSE
Form FactorRack-mountableStandaloneRail-mountableWall MountableDesktopExternal
Weight (Approximate)1.10 lb
Power SourcePower Supply
Limited WarrantyLifetime
The OmniConverter FPoE/SL, FPoE/S and FPoE+/S are multiport media converters that convert 10/100BASE-T copper to 100BASE-X fiber and support Power-over-Ethernet (PoE and PoE+). Classified as Power Sourcing Equipment (PSE), they provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data. The OmniConverter FPoE/SL is a cost-effective media converter that provides up to 15.40W PoE (IEEE 802.3af) per RJ-45 port and supports frame sizes up to 2,000 bytes. The OmniConverter FPoE/S provides up to 15.40W PoE (IEEE 802.3af) per RJ-45 port and supports frame sizes up to 10,240 bytes. The OmniConverter FPoE+/S provides up to 34.20W PoE+ (IEEE 802.3at) per RJ-45 port and supports frame sizes up to 10,240 bytes. The FPoE+/S powers the more demanding PDs such as outdoor PTZ (pan-tilt-zoom) cameras and multi-band, multi-stream wireless access points. Models with two fiber ports support redundant fiber optic uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to cascade multiple media converters, or it may be used as another switch port. Configurable features include link modes and a PoE power reset function that enables a PD device to be re-initialized remotely. When a problem with a PD is identified, the fiber port on a managed switch can be shut down or disconnected, enabling the PoE power reset function on the OmniConverter. The PoE power to the PD is disabled for 2 seconds when a loss of receive fiber link is detected by the OmniConverter, eliminating the need for costly truck rolls to remote PD sites. Link modes can be configured to propagate loss-of-link faults to managed devices, immediately notifying administrators of network outages. OmniConverter media converters support fixed-fiber connectors and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. They support multimode and single-mode dual fiber; and single-mode single-fiber, in standard and CWDM wavelengths. The compact standalone OmniConverter media converters can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19" rack-mount shelf. They are available with DC power input via terminal connectors or external 100 to 240V AC power adapters.