OS
ComNet CNGE28FX4TX24MS2 Ethernet Switch
Manufacturer: ComNet
SKU: CNGE28FX4TX24MS2
Condition: New
ComNet CNGE28FX4TX24MS2 Ethernet Switch
Product TypeEthernet Switch
Brand NameComNet
ManufacturerComNet
Product ModelCNGE28FX4TX24MS2
Product NameCNGE28FX4TX24MS2 Ethernet Switch
Manufacturer Part NumberCNGE28FX4TX24MS2
Manufacturer Website Addresshttp://www.comnet.net
ManageableYes
Environmentally FriendlyYes
Environmental CertificationRoHSWEEE
Compatible Rack Unit1U
Height10.2"
Width1.7"
Form FactorRack-mountable
Length17.2"
Ethernet TechnologyGigabit Ethernet
Media Type SupportedTwisted PairOptical Fiber
Network Technology10/100/1000Base-TX100/1000Base-FX
Number of Total Expansion Slots4
Number of SFP Slots4
Shared SFP SlotYes
Expansion Slot TypeSFP (mini-GBIC)
ModularYes
Total Number of Network Ports28
Port/Expansion Slot Details24 x Gigabit Ethernet Network4 x Gigabit Ethernet TP/SFP Combo
Power SourcePower Supply
Limited WarrantyLifetime
Layer Supported2
The ComNet CNGE28FX4TX24MS2 Layer 2 Managed 28 Port Ethernet Switch supports twenty-four 10/100/1000 BASE-TX ports and four 10/100/1000 BASE-TX or 100/1000 BASE-FX SFP Combo ports of Ethernet data. The four combination ports are 10/100/1000TX or 100/1000FX SFP* configurable for fiber type (multimode or single-mode), connector type and distance. Dual 48 VDC input power design ensures vital network capabilities with minimum downtime. Utilizing RSTP/STP (802.1w/1D) MSTP, and X-Ring redundant ring topologies, a network recovery time of <20 ms is provided for protection from network faults or temporary interruptions. The CNGE28FX4TX24MS2 is optically (100/1000BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet device and are hardened for use in harsh operating environments. Features STP/RSTP/MSTP supported Port lock to prevent access from unauthorized MAC address SNMP V1/V2c/V3 for secure network management Legacy ring allows the switch to be used in an existing ring of ComNet X-Ring enabled switches Low-profile 1-RU (1.75-inch) high rack-mountable chassis mounts within any standard 19-inch equipment rack Event notification through Syslog, E-mail, SNMP trap 56 Gbps Backplane for layer 2 traffic forwarding IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic & Port Trunking for ease of bandwidth management RMON for traffic monitoring No fans or forced-air cooling; cooling via natural convection eliminates unreliable and troublesome fans/moving parts, with no periodic maintenance requirements. Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances (SFPs ordered separately). Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment. Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput Web-based, Telnet, Console (CLI), and Windows-based utility (eConsole) configuration Applications ITS Traffic Signalization & Surveillance/ Incident Detection Networks Industrial and Factory Automation Integrated IP-Video and Data Transmission Networks Industrial Security Access Control Systems