OS
Bosch LB1-BW12-L1 Bidirectional Cabinet Loudspeaker
Manufacturer: Bosch
UPC: 0800549725835
SKU: LB1-BW12-L1
Condition: New
Bosch LB1-BW12-L1 Bidirectional Cabinet Loudspeaker
Product TypeSpeaker
Brand NameBosch
ManufacturerThe Bosch Group
Product NameBidirectional Cabinet Loudspeaker
Product LineCabinet
Manufacturer Part NumberLB1-BW12-L1
Manufacturer Website Addresshttp://www.bosch.com
Height9.4"
Width9.4"
Depth5.2"
ColorWhite
Form FactorWall Mountable
Weight (Approximate)4.34 lb
Minimum Frequency Response160 Hz
Maximum Frequency Response17 kHz
RMS Output Power12 W
PMPO Output Power18 W
Impedance833 Ohm
The LB1-BW12-x1 is a 12 W, cost-effective, bidirectional loudspeaker for indoor use. The baffle design creates a wide opening angle, making this loudspeaker very suitable for use in long corridors. Keyholes at the rear provide quick and easy wall mounting. The cabinet is available in black or white. Functions The robust, solid MDF (Medium Density Fiber board) enclosures are covered with a durable, easy-to-clean vinyl in a choice of white or black. The ABS fronts are covered with fine woven cloth in matching color. The cabinets have two dual cone loudspeaker drivers, mounted on an angled baffle, providing a wide opening angle. This model is intended for use in long corridors, such as in shopping arcades. Certifications and approvals All Bosch loudspeakers are designed to withstand operating at their rated power for 100 hours in accordance with IEC 268-5 Power Handling Capacity (PHC) standards. Bosch has also developed the Simulated Acoustical Feedback Exposure (SAFE) test to demonstrate that they can withstand two times their rated power for short durations. This ensures extra reliability under extreme conditions, leading to higher customer satisfaction, longer operating life, and much less chance of failure or performance deterioration.Installation/configuration notesThree keyholes in the rear panel provide easy and quick wall mounting. A convenient, easy-to-use, double five-pole push-in terminal block is present on the rear panel for on-site wiring. This terminal block has provision for power tapping on the 70 V / 100 V, matching transformer in the cabinet. It allows selection of nominal full-power, half-power, quarterpower or eight-power radiation (in 3 dB steps).