Attention Customers:

We and our supply partners are experiencing a high volume of orders on health and safety products and inventories are rapidly changing. Due to this situation, orders are being processed slower than normal. We are working to communicate your order status as it progresses. Thank you again for your business and we appreciate your patience.

OS
Atlas Sound DPA1202 Multi-Channel Network Amplifier
Manufacturer: Atlas Sound
UPC: 612079190690
SKU: DPA1202
Condition: New
Atlas Sound DPA1202 Multi-Channel Network Amplifier
Product TypeAmplifier
Product SeriesDPA
Brand NameAtlas Sound
ManufacturerAtlas Sound LP.
Product ModelDPA1202
Product NameDPA1202 Multi-Channel Network Amplifier
Manufacturer Part NumberDPA1202
Manufacturer Website Addresshttp://www.atlassound.com
Environmentally FriendlyYes
Environmental CertificationTÜV
Package Contents
  • DPA1202 Multi-Channel Network Amplifier
  • 8 x 18-10 AWG Wires
Audio Channels4
RMS Output Power1200 W
EthernetYes
Minimum Frequency Response20 Hz
Maximum Frequency Response20 kHz
Total Harmonic Distortion (THD)1%
ClassificationAB
Impedance4 Ohm
Operating Power Consumption1713 W
Height1.8"
Width19"
Depth14.5"
Weight (Approximate)13 lb
Limited Warranty3 Year
The AtlasIED DPA1202 features a combination of flexibility, performance and control to provide high value features for applications that require more than just great sound. The network based DPA1202 is a DSP controlled 4-channel amplifier that can be configured in three different amplification arrangements to meet the design requirements of any installation. The unit is factory preconfigured in a two-channel 70V mode. If the design requires four channels of low impedance amplification, the amplifier can be configured as 4-channel model with either 4? or 8? load impedances. Many system designs require both low and high impedance amplification. This unit can be configured to deliver 70V/100V for a paging/background system on a single channel plus two additional 4?/8? amplifier channels for foreground stereo applications. The DPA1202 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 4-channel Dante™ receiver card or a DPA-AMIX (2) mic / line, (2) AUX input card, giving the DPA1202 a total of 8 inputs. All inputs can be mixed and routed to any of the four amplifier channels. All four amplifier channels have an assortment of DSP tools including level controls, EQ's, limiters, high & low pass filters, and delay to provide flexibility for a range of applications. The output level can be assigned to either the front panel potentiometers or to the on board GUI. Wired remote level control can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet or mobile device using a web browser. All settings can be password protected. The unit also includes a PC based site manager software that automatically searches within a specific network for all DPA amplifiers on the network. It will list them and allow a single click access to any unit. The DPA Site Manager software can do a variety of functions besides locating IP addresses such as; fault reporting, input & output status, standby status and remote activation via a scheduler timer. The flexibility of the DPA Series amplifiers and comprehensive assortment of local or network control configurations make them an ideal choice in today's sophisticated commercial audio market.