Attention Customers:

1) We and our supply partners are experiencing a high volume of orders on health and safety products and inventories are rapidly changing. Due to this situation, orders are being processed slower than normal. We are working to communicate your order status as it progresses. 2) Health and safety products such as face masks, gloves, hand sanitizer and toilet paper are not returnable. Thank you again for your business and we appreciate your patience.

OS
AddOn ADD-GMCP50-MX-SC Transceiver/Media Converter
Manufacturer: AddOn
UPC: 821455191101
SKU: ADD-GMCP50-MX-SC
Condition: New
AddOn ADD-GMCP50-MX-SC Transceiver/Media Converter
Product TypeTransceiver/Media Converter
Brand NameAddOn
ManufacturerAddOn
Product NameTransceiver/Media Converter
Manufacturer Part NumberADD-GMCP50-MX-SC
Manufacturer Website Addresshttp://www.addoncomputer.com
Packaged Quantity1
Ethernet TechnologyGigabit Ethernet
Network Technology1000Base-MX10/100/1000Base-TX
USBNo
DVINo
Network (RJ-45)Yes
Management PortNo
Number of PoE+ (RJ-45) Ports1
Number of SC Ports1
Total Number of Ports2
PoE Port TypePSE
Media Type SupportedTwisted PairOptical Fiber
Fiber Mode SupportedMulti-mode
Fiber Optic Wavelength1310 nm
Maximum Distance Supported1.24 Mile
Power SourcePower Supply
Limited WarrantyLifetime
This is a media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-MX(SC) via a 1310nm multi-mode fiber (MMF) SC connector, which allows distance reach up to 2km. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-MX fiber, while extending the network reach beyond the 100m reach limitation of copper. This is an AC/DC powered PoE media converter complies with IEEE802.3af and IEEE802.3at standards. It is a Power Sourcing Equipment (PSE), which combines data transferred over a fiber optic link with 48V power supply, providing power to either IEEE802.3af or IEEE802.3at powered devices (PD) up to 100m (330feet) over CAT5e, CAT6, or CAT6A UTP cable. This provides 52V/1.0A/50 watts of output power. This media converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection and LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Our media converters and network interface cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs.